Grease Arrestors are commonly used in Butcher's shops, Cafe's, Restaurants,
Bakeries, Take-aways etc. to remove the free grease and oils and assist in
preventing pipe blockages etc. They are required by legislation in many areas.
The following table covers the most common sizes available.
WHY FIBREGLASS AND NOT CONCRETE?
As per Sydney Water requirements, all concrete / reinforced
precast grease arrestors must be epoxy coated internally, annually.
Fibreglass Grease Arrestors are fabricated with a 7mm Iso-resin wall, HPR-800
Gun Rovings, Iso-Npg Gelcoat internal lining and Iso-Npg Flowcoat external
finish
Aglass Grease Arrestors do comply with the principals of the following
Australian Standards
- AS 5200 - 2005 – Procedures for certification of plumbing and drainage
products
- AS 3500:2003 – Plumbing and Drainage
- AS/NZ 4494:1998 – Discharge of commercial and industrial liquid waste to
sewer – General performance requirements.
Aglass are also distributors of AJM Environmental Services stainless
steel boat shaped grease arrestors. The grease arrestors are fabricated in
stainless steel to guarantee a long life in even the most arduous of
applications. All AJM Grease Traps / Grease Arrestors have been structurally
designed and certified for above ground use and are fabricated in designated
stainless steel only workshops to the highest standards.
Aglass also specialises in the relining of old existing concrete
grease arrestors with fibreglass sheeting fabricated to your specific
requirements.
Sizes: Start at 500 litre and up to and including 5000 litres
Construction: Heavy Duty Fibreglass
Installation: Can be installed above ground and below ground
A wide range of lids are available including:
- Heavy Duty Fibreglass for garden beds.
- Light Duty Class B - Pedestrian trafficable gas tight.
- Heavy Duty Class D - Cars, Trucks, Semi Trailers and Forklifts
If gravity fall is not obtainable on an below ground unit various sizes of
Risers are available.
Example of users:
| Canteens, Cafeterias, Restaurants etc | Grease Arrestor Capacity | Weight (Kg) Approx. |
| Discharge up to 1,100L/day, typically up to 69 seats | 500 litre | 60 |
| Discharge up to 1,100L/day, typically up to 69 seats | 1000 litre | 80 |
| Discharge up to 3,200L/day, typically 70 to 199 seats | 1500 litre | 90 |
| Discharge up to 6,400L/day, typically 200 to 399 seats | 2000 litre | 110 |
| Discharge up to 9,600L/day, typically 400 to 599 seats | 3000 litre | 150 |
| Discharge up to 12,800L/day, typically 600 to 799 seats | 4000 litre | 200 |
| Discharge up to 16,000L/day, typically 800 to 1000 seats | 5000 litre | 300 |
Aglass manufactures from the smallest to the largest
application.
Please contact Aglass by phoning: 02 9542 6511 or
emailing us via the Contact
Us page for further information
on any of these products.