Grease Arrestors are commonly used in Butcher's shops, Cafe's, Restaurants, Bakeries, Take-aways etc. to remove the free grease and oils and assist in preventing pipe blockages etc. They are required by leglislation in many areas. The following table covers the most common sizes available.
WHY FIBREGLASS AND NOT CONCRETE?
As per Sydney Water requirements, all concrete / reinforced precast grease arrestors must be epoxy coated
internally, annually.
Fibreglass Grease Arrestors are fabricated with a 7mm Iso-resin wall, HPR-800 Gun Rovings, Iso-Npg Gelcoat internal lining and Iso-Npg Flowcoat external finish.
Aglass are also distributors of AJM Environmental Services stainless steel boat shaped grease arrestors. The grease arrestors are fabricated in stainless steel to guarantee a long life in even the most arduous of applications. All AJM Grease Traps / Grease Arrestors have been structurally designed and certified for above ground use and are fabricated in designated stainless steel only workshops to the highest standards.
A wide range of lids are available including gas tight, pedestrian and heavy duty in both fibreglass and cast iron.
Aglass also specialises in the relining of old existing concrete grease arrestors with fibreglass sheeting fabricated to your specific requirements.
CLICK HERE FOR GREASE ARRESTOR BROCHURE
Sizes: Start at 500 litre and up to and including 5000 litres
Construction: Heavy Duty Fibreglass
Installation: Can be installed above ground and below ground
Lid Options:
- Fibreglass for garden beds.
- Light Duty Class B - Pedestrian trafficable gas tight.
- Heavy Duty Class D - Cars, Trucks, Semi Trailers and Forklifts
If gravity fall is not obtainable on an below ground unit various sizes of Risers are available.
Examples of Uses:
| Canteens, Cafeterias, Restaurants etc |
Grease Arrestor Capacity |
Weight (Kg) Approx. |
| Discharge up to 1,100L/day, typically up to 69 seats |
500 litre |
60 |
| Discharge up to 1,100L/day, typically up to 69 seats |
1000 litre |
80 |
| Discharge up to 3,200L/day, typically 70 to 199 seats |
1500 litre |
90 |
| Discharge up to 6,400L/day, typically 200 to 399 seats |
2000 litre |
110 |
| Discharge up to 9,600L/day, typically 400 to 599 seats |
3000 litre |
150 |
| Discharge up to 12,800L/day, typically 600 to 799 seats |
4000 litre |
200 |
| Discharge up to 16,000L/day, typically 800 to 1000 seats |
5000 litre |
300 |
Aglass manufactures from the smallest to the largest application.
CLICK HERE FOR GREASE ARRESTOR BROCHURE
Please contact Aglass by phoning: 02 9542 6511 or
emailing aglass_sales@bigpond.com for further information
on any of these products.
 Back To Products
|
